Jim Groeneweg Truck Pictures Collection - Miscellaneous BC Truck Pictures Page 7

Jim Groeneweg Truck Pictures Collection

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7

Last Updated on :

Jim also has a WEB SITE with more pictures and you can order some of his cabs.

You may download any image for personal or non-commercial use only.
YOU MAY NOT DOWNLOAD ANY PICTURE FROM THIS WEB SITE TO BE USED ON YOUTUBE OR FACEBOOK.
Click on the picture to bring up a larger image.

Miscellaneous BC Truck Pictures

The other day the owner of this truck came by to se me; we restored his 1966 F100 Ford pickup............it was black with all the chrome...........looked real nice much like the black Peterbilt that he stopped in with! The Pete and Ford belong to Bill Elliott of Elliott Transport

Elliot Transport Peterbilt Bill Elliot's Peterbilt 379 and Ford F100

Bill Elliot's Peterbilt 379 and Ford F100 Bill Elliot's Peterbilt 379, Ford F100 and Cobra

We were just looking for trucks with Cat engines at the dealership and noticed this new style hood on the Star; haven't said anything on their website about it but the hood has less slope.......or more rounded! Jamie is working on a Western Star resin cast hood in 1/24 scale.....thus the search!

Here is a 7600 at work in Cloverdale, BC 80's Freightliner FLC with flat top sleeper GMC General dump truck

Bobell Kenworth T-800 chip truck dumping his load at Port Kells, BC

Today I had this nice IH S-1900 stop in to sandblast his engine, I think it is a 455 Pontiac, definitely out of a 71 Grand Prix! The truck has almost one million kms on it and still looks very nice!

A much newer Peterbilt 379 from Trans Border Logistics

1973 Dodge CN-800 taken at the 2008 Langley Cruise-In Country Lumber Pete's and Kenworth tri-drive trucks taken at the 2008 Langley Cruise-In Restore BC Hydro GMC "Fishbowl" bus taken at the 2008 Langley Cruise-In

In-N-Out Burger's Peterbilt 330 with crew cab taken at the 2008 Langley Cruise-In Snap-On Tools Freightliner M2 taken at the 2008 Langley Cruise-In

1966 Mustang GT 350 taken at the 2008 Langley Cruise-In

this is an ex Manitoulin tractor from Ontario that was altered to work here in BC! The owner now, Gary Swan, utilized this truck to work as a crane flat deck but had to change the W.B. and the rear 72" spread axle plus remove the lift axle to make this unit legal! It is a true work horse and a cool second life for a truck that has a lot of life left on it! He brought in parts (to sandblast) of an old Dodge resto rod truck that promises to be quite cool.

I found this Argosy at the Vancouver Frreightliner dealer, quite hard to find anymore as they stopped marketing them here in North America in 2007! What a shame, now I don't think there is a COE available anymore. New Cascadia taken at the Vancouver Freightliner dealership

Some miscellaneous shots taken at Port Kells, BC

Here is my contribution to the CN trucks. A Kenworth T-800 taken in Langley, BC Century flat top sleeper taken in Port Kells International 9900i taken the other day in Coquitlam

There are sometimes highlights when doing home reno's..............like when the material comes on a Hiab instead of the deck as planned.
I had to get the camera and take shots of the action..............then the work began. Here are a few of the pictures with more to come.

We are getting down to the wire..............cleaning out the storage yard! There is a parade of units heading to the gate! This was the catch of the day..............2 KW's loading up a Chevy Apache along with a 1964 Dodge camper unit!

Not often we see the Ford F750 here in the tandem axle version..........
This one looks OK for it's age. Here is another old unit (stored 13+yrs)
a GMC on her way out on the back of a T800.

Ford Louisville entering the storage area Here is the last of the tow out from the storage yard

Check this out.............Jimmy has a new jimmy..........well not new but new to me! This is a 1971 GMC 9500 with a 637 V8 engine and a 5+2 spd. I will take some better pictures of it after we clean it up. We actually got the thing running to day and I took at for a drive down the street..............sssshhhhhh!! What a blast that was! Maybe we will add some tail lights so we can permit it and go for a real spin!!

E-Mail any comments to Hank Suderman

E-Mail any comments to Jim Groeneweg

Please sign Hank's Guestbook

View Hank's Guestbook

Back to the Trucks Page

Back to the Main Transportation Page

Miscellaneous BC Truck Pictures



The other day the owner of this truck came by to se me; we restored his 1966 F100 Ford pickup............it was black with all the chrome...........looked real nice much like the black Peterbilt that he stopped in with! The Pete and Ford belong to Bill Elliott of Elliott Transport



Elliot Transport Peterbilt	Bill Elliot's Peterbilt 379 and Ford F100

Bill Elliot's Peterbilt 379 and Ford F100		Bill Elliot's Peterbilt 379, Ford F100 and Cobra













	We were just looking for trucks with Cat engines at the dealership and noticed this new style hood on the Star; haven't said anything on their website about it but the hood has less slope.......or more rounded! Jamie is working on a Western Star resin cast hood in 1/24 scale.....thus the search!

Here is a 7600 at work in Cloverdale, BC	80's Freightliner FLC with flat top sleeper	GMC General dump truck

Bobell Kenworth T-800 chip truck dumping his load at Port Kells, BC

Today I had this nice IH S-1900 stop in to sandblast his engine, I think it is a 455 Pontiac, definitely out of a 71 Grand Prix! The truck has almost one million kms on it and still looks very nice!

A much newer Peterbilt 379 from Trans Border Logistics

1973 Dodge CN-800 taken at the 2008 Langley Cruise-In	Country Lumber Pete's and Kenworth tri-drive trucks taken at the 2008 Langley Cruise-In	Restore BC Hydro GMC "Fishbowl" bus taken at the 2008 Langley Cruise-In

In-N-Out Burger's Peterbilt 330 with crew cab taken at the 2008 Langley Cruise-In	Snap-On Tools Freightliner M2 taken at the 2008 Langley Cruise-In

1966 Mustang GT 350 taken at the 2008 Langley Cruise-In

this is an ex Manitoulin tractor from Ontario that was altered to work here in BC! The owner now, Gary Swan, utilized this truck to work as a crane flat deck but had to change the W.B. and the rear 72" spread axle plus remove the lift axle to make this unit legal! It is a true work horse and a cool second life for a truck that has a lot of life left on it! He brought in parts (to sandblast) of an old Dodge resto rod truck that promises to be quite cool.

I found this Argosy at the Vancouver Frreightliner dealer, quite hard to find anymore as they stopped marketing them here in North America in 2007! What a shame, now I don't think there is a COE available anymore.		New Cascadia taken at the Vancouver Freightliner dealership

Some miscellaneous shots taken at Port Kells, BC

Here is my contribution to the CN trucks. A Kenworth T-800 taken in Langley, BC	Century flat top sleeper taken in Port Kells	International 9900i taken the other day in Coquitlam
There are sometimes highlights when doing home reno's..............like when the material comes on a Hiab instead of the deck as planned. I had to get the camera and take shots of the action..............then the work began. Here are a few of the pictures with more to come.








We are getting down to the wire..............cleaning out the storage yard! There is a parade of units heading to the gate! This was the catch of the day..............2 KW's loading up a Chevy Apache along with a 1964 Dodge camper unit!


	Not often we see the Ford F750 here in the tandem axle version.......... This one looks OK for it's age.	Here is another old unit (stored 13+yrs) a GMC on her way out on the back of a T800.

Ford Louisville entering the storage area	Here is the last of the tow out from the storage yard

Check this out.............Jimmy has a new jimmy..........well not new but new to me! This is a 1971 GMC 9500 with a 637 V8 engine and a 5+2 spd. I will take some better pictures of it after we clean it up. We actually got the thing running to day and I took at for a drive down the street..............sssshhhhhh!! What a blast that was! Maybe we will add some tail lights so we can permit it and go for a real spin!!