Daryl Wear Truck Pictures Collection
Last Updated on :

You may download any image for personal** or non-commercial use only.

**Personal does NOT mean you can post them on your own YouTube or FaceBook pages.


Daryl's other ride
Taken by a reporter at the Rodeo Grounds at The Great Canadian Bike Rally in Merritt, BC



Check out the videos I've taken of some of my heavy haul moves



Sunday Jan/18/09, we ran into this truck around the Lickman area. Not bad for a lowbed truck.
Everything was so new even the deck didn`t have a load on it yet, a virgin!!!



This was Daryl's 1988 Kenworth W900 that he used for many years. But in September 2008 the truck was involved in a head-on collision with someone who was 100% at fault and sadly did not survive. The truck was a write-off. This is Daryl's Pete that he has been working on while he has been recuperating from his injuries from the accident. Here is the truck shortly after it was painted.
Here are multiple shots of Daryl's Pete after he had someone do the pinstriping on it.



Some pictures of Daryl's Pete after the BC Big Rig Show & Shine in July 2009



PC300 Komatsu excavator I was loading in Deroche in July 2009
   
     
   
   
   
   



Ol' School at Work
I do go off road and get my new Peterbilt dirty!
     
     
>Here is my trailer loaded with an old twin engine scraper, one in the
front and one at the very back powering the separate ends, But with two gas pedals side by side. This was fun to load as the brakes didn`t work worth crap! It is 12' wide and ugly heading to Likely, B.C. mid September.



Dead cat 988B I had to haul today from Abbotsford, to Highway #9, 15`4" high, 13`4" wide.



February 17, 2012 Daryl picked up a new Pacesetter lowboy trailer and his first job with the new trailer was to pick up this Hayes HDX and deliver it to Ritchie Auctions in Chilliwack, BC
     
Here are links to some videos taken during this job: Click Here



Here is one of my new Pacesetter lowbeds with a 4300 Linkbelt Road Builder with a spir mounted on top of the boom I brought back from the Island.
I was 12’ wide, 14’ tall and 87’ long.
     
     
     
2001 Kenworth I just bought and what it looked like when it showed up
What it looked like today(two weeks later) after removing the sleeper and rear Dayton wheels,
Oh, and washed off some of the Nova Scotia dirt.
   
Jeff loaded on 8 axles heading for Edmonton
with a track frame from a EX2500 excavator, which this part alone is around 70,000 lbs.

The photo on the left shows Hank Suderman taking a picture of my truck after the 2012 BC Big Rig Show & Shine in Chilliwack.

The photo on the right is the photo that Hank took.

2012 BC Big Rig Show and Shine Weekend



On November 2, 2012 I picked up my new jeep for Pacesetter Manufacturing Inc. in Langley, BC
Hank Suderman came by and shot some pictures
     
     
     
     
     
     
     
     
     
     
     
     
   



14 ft wide snow groomer hauled up to the toll booth (use to be) on the Coquihalla Highway. A posed shot taken at the Hunter Creek Scales
showing Daryl's new jeep ready for work.



I painted my 2001 W900 that was black, then with a green sleeper, and now orange. Hank Suderman's wife captured me heading home after coming back from Edmonton Trailer with my brand new Tilt trailer.
My new “Stellar” 55 ton tilt trailer built by “Edmonton Trailer” Alberta.



E-Mail any comments to Hank Suderman         E-Mail any comments to Daryl Wear
Back to the Main Transportation Page
Back to the Trucks Page